Panel saw models

 

Saw Trax is the industry leader in vertical panel saws and the only panel saw manufacturer in it’s class to offer sealed roller bearings for a smoother, easier and more accurate cut.

 

Standard on all Vertical Panel Saws

 
  • 10′ wide Full Size or 5′ wide compact Frame
  • Welded steel frame, powder coated finish
  • Rip Cut Either Direction
  • Zinc plated, 1/8” wall, steel guide tubes
  • Top and bottom guide tube brackets ensure straight track
  • “Set & Forget” Accu-Square™ Alignment System
  • Accu-Fence™ Alignment System (Full Size Units)
  • Accu-Glide™ Steel Roller Bearing System
  • 2 Carriage locks ensure no play when ripping or routing
  • Injected Molded Plastic Material Rollers
  • The most Material Support Rollers in its class
  • Uses Standard Size Blades (Found Everywhere)
  • Saw cord holder & Spring loaded saw counter balance

 

Varsity & 1000 Series
7 1/4 inch Makita 5007N 15 amp saw
Trigger locking mechanism
Spinning saw insert plate
Dust collection hood with viewing port
2.5″ vacuum hose – 12 foot
Dust shroud brush
Vertical measuring systems
Dual rip gauge
Stop block with strip bar
2 horizontal measuring tapes
24 tooth carbide tipped blade

2000 Series
7 ¼ inch Worm drive 15 amp saw
Toggle power switch
Spinning saw insert plate
Dust collection hood
2.5″ vacuum hose – 12 foot
Dust shroud brush
Vertical measuring systems
Dual rip gauge
Stop block with strip bar
2 horizontal measuring tapes
24 tooth carbide tipped blade
Steel covered material rollers

3000 Series
10 inch Milwaukee 15 amp saw
Trigger locking mechanism
Spinning saw insert plate
Dust collection hood
2.5″ vacuum hose – 12 foot
Dust shroud brush
Vertical measuring systems
Dual rip gauge
Stop block with strip bar
2 horizontal measuring tapes
Carbide tipped blade
Steel covered material rollers


Basic Series
Universal Saw Plate with clamps
Fits most 7.5 inch saws (saw not included)

Classic Series
7 1/4 inch Makita 5007N 15 amp saw
Trigger locking mechanism
Standard insert plate
Saw cover with viewing port
Single horizontal measuring tape
Vertical measuring system
Single rip gauge
24 tooth carbide tipped blade

Sign Makers Series
7 1/4 inch Makita 5007N 15 amp saw
Trigger locking mechanism
Spinning saw insert plate
Dust collection hood with viewing port
2.5″ vacuum hose – 12 foot
Dust shroud brush
Vertical measuring systems
Dual rip gauge
Stop block with strip bar
2 horizontal measuring tapes 24 tooth carbide tipped blade
Pivoting Knife cutter insert plate
Spring hold down